|
T8F-80z Laser sprocket with 80 teeth for "big chain"
|
|---|
Product description:
Laser rear sprocket with 80 teeth. Suitable for the T8F "big" chain.
This sprocket is made by laser cutting. This makes this sprocket 100% round and has No high or side hits.
Which naturally has a very positive effect on the driving characteristics.
6,5 "Scooter:
Used as "extreme mountain transmission" 11/80. Suitable for extremely high gradients.
10 "Scooter:
Used as "medium transmission" 11/80. Suitable for low gradients.
Not suitable for 4 "scooters
There are 3 hole circles for the screw connection. d=40mm*3, d=48mm*3, d=65mm*4
Sprocket suitable for the following chain:
Symbolic picture. Installed on a 6,5" eScooter 
| Note |
|---|
Depending on the version of the rear swing arm and the engine suspension, a modification may be necessary Of the engine suspension. To enable this conversion, we offer a
"Engine Mount Conversion Flange"
|
Technical specifications
|
|
|---|---|
| number of teeth | 80 Teeth |
| chain splitting | T8F suitable for "big chain" |
| material | S355J2+N. Laser processed for optimum roundness |
| coating | black coated, corossion protection |
| outer diameter (Da) | aprox 208mm |
| inner diameter (di) | 29mm |
| pitch circle (Lk) | 40mm*3, 48mm*3, 65mm*4 |
| hole spacing (La) | at LK40= 34mm*3 / at LK48= 41,5mm*3 / at LK65= 45,9mm*4 |
| mounting hole(B) | 6,5mm |
| width | aprox 4mm |
| weight | aprox 625g |
| included in delivery: | |||
|---|---|---|---|
| 1x laser sprocket | 80 teeth T8F | ||
| Optionally included (separately for selection) |
|---|
| 1x flange | Engine mount conversion flange |
| 1x attachments | Spacer sleeve, screws, nut and washer |