|
11/64 T8F Complete transmission mountain with laser sprocket for "big" chain
|
|---|
yxs
Product description:
Complete transmission with a gear ratio from the front 11 teeth to the rear 64 teeth.
This transmission is the "mountain transmission" and is suitable for terrain with high gradients.
With this transmission you achieve a good climbing ability as well as maximum acceleration.
This transmission has been made by the sprocket especially with laser cutting a very accurate and quiet running property.
Depending on the chassis, a different chain length is necessary. See distance waves.
To install this transmission, we recommend the engine mount conversion flange So that the chain can run properly. See description below.
See distance waves.
Dimensons sprocket / pinion:
Leegend of the chain:
| Note |
|---|
Depending on the version of the rear swing arm and the engine suspension, a modification may be necessary Of the engine suspension. To enable this conversion, we offer a
"Engine Mount Conversion Flange"
|
Technische Daten komplette Übersetzung
|
|
|---|---|
| Designation | T8F 11/64 Complete transmission |
| Front sprocket | 11 Teeth |
| Rear sprocket | 64 Teeth |
| Distance of waves | 195mm or 210mm |
| Chain with shaft center 195mm | 45 chain links, T8F big version. 1/2 chain length aprox 36,0cm |
| Chain with shaft center 210mm | 47 chain links, T8F big version. 1/2 chain length aprox 37,6cm |
| Weight | aprox 650g |
|
Technical specifications pinion
|
|
|---|---|
| outer diamteter | aprox 32mm |
| inner diameter | 10mm |
| diameter of the groove | 8,5mm |
| width / thickness | aprox 3mm |
| Teeth | 11 |
|
Technical specifications sprocket
|
|
|---|---|
| Number of teeth | 64 Teeth |
| material | S355J2+N. Laser processing for optimum roundness |
| coating | black coated, corrosion protection |
| outer diameter (Da) | aprox 167mm |
| inner diameter (di) | 29mm |
| hole spacing (La) | 40mm*3, 48mm*3, 65mm*4 |
| pitch circle (Lk) | at LK40= 34mm*3 / at LK48= 41,5mm*3 |
| mounting hole(B) | 6,5mm |
| width | aprox 4mm |
| Suitable for the chain name | T8F |
| Note to chain length |
|---|
The chain length varies depending on the travel length. Measure the distance of your scooter Waves (AW).
Use this distance to determine the appropriate chain length for your vehicle. The conversion of the shafts (AW) to the matching chain is given in the technical data.
| included in delivery: | |||
|---|---|---|---|
| 1x Complete transmisssion 11/64 T8F | 11z sprocket front, 64z sprocket rear lasercut, Chain depending on the selection |
||
| Optionally included (separately for selection) |
|---|
| 1x flange | Engine mount conversion flange |
| 1x attachments | Spacer sleeve, screws, nut and washer |