Selector switch - forward-reverse for eQuad

Produktbeschreibung:
Selector switch for reversing the motor. 2 pole, allows the swapping of + and - pol and thus allows the polarity reversal, clockwise rotation of the motor or forward or reverse. Suitable for brushed motors from our product spectrum.

See picture below. Blue - pole and red + pole come from the battery.
On the front side of the selector switch you have to clamp the + pole on the upper left side and the - pole hast to be clamped on the lower left side.
On the right side you have to reverse the cables, so on the upper right the - pole has to be clamped and on the lower right the + pole has to be clamped.
At the back you choose the middle contacts which lead to the engine.
Depending on the switching position of the selector switch, the motor now runs to the right or left.
(Attention, cable is not included! Incorrect connection may cause short circuit.)