FOR SALE - Freakyscooter! Brushless eScooter 48-1600

 
Product description:
This model 48-1600 eScooter is equipped with a 6.5 "chassis, built with a 48 volt supply and a 1600 watt brushless motor, strong enough to handle up to 15% incline and a speed of about 40km Of course you can achieve a higher climbing ability or higher top speed.

New or special on this model

• 6.5 "wheels on" Hanzo Design "alloy wheels (split)
• 48V with max. Motor power 1600W (48V 1600W output power)
• Brake system BOLI 4 with new brake disc (smooth and wear-resistant)
• reduced tail light with brake light function in LED version
• New locking system for the seat post
• ECO / Turbo function (this function allows a slow start with half power)

Product description:
The front and rear wheel has disc brakes. The rear wheel is equipped with two adjustable threaded spring struts. The rims are made of aluminum in the new "Hanzo style". The rims are 2 divided for easy tire change. The 6.5-inch tires are air-filled and equipped with a commercially available hose with a car valve.The power transmission from the engine to the rear wheel is secured to a reliable chain drive.The ECO- Thus, a "soft" start or a savings operation is possible directly on the steering tube The charger is plugged into the eScooter.The seat post is equipped with a new locking system, which snaps into the seat post and thus the seat post locks the saddle can be easily removed.

Batteries and range:
This electric scooter can be equipped with different batteries. The higher the capacity of the batteries (Ah), the higher the range. Depending on the battery ranges of 15km to 80km are possible! In addition we offer cheap and high-quality lead batteries or modern long-lasting quality lithium batteries from SAMSUNG which even increase the engine power (felt) up to 20%.

The batteries are packed in a portable external bag.
So these can be fast for eg. external charging, storage, or battery replacement, to be removed.

Climbing ability:
Whether on the mountain, hills or in the lowlands. The transmissiona can be done with different sprockets change. This allows you to find the optimum ratio and climbing ability for each area. By default, a mixed terrain translation is installed.

The eScooter is foldable!
Thus, it can be transported very easily and it fits in any normal trunk.

• The eScooter is delivered assembled to 95%! All you have to do is assemble the handlebars and some trifles, and check the brake and chain settings. An installation manual is enclosed. The completion should not be a problem for everyone. Nevertheless, we advise you to have the final assembly carried out by a specialist!
• In your own interest, always drive with adequate protective clothing and at a reasonable speed!
• Have your eScooter and batteries serviced regularly!
• We offer a service in this regard! We assume no liability for improper use or damage due to poor or no maintenance of the vehicle.
• Despite careful control, changes, typos, errors in image and text are reserved.