36V 1,6A optimized lead acid battery charger Output 43.2V Modell GJS150-4320160

Product description:
This high - quality charger for lead batteries comes in an plastic housing.
Attention! Check the specifications of the charger for your battery!

Charge time:
A rule of thumb for the calculation of the charging time results from the battery capacity and the charging current. For example with a completely emptied battery with 20Ah capacity and a charger with 2A charging current it results approximately:
20Ah : 1,6A = 12,5h maximum charging time with a 1,6A charger
The charging time is therefore shortened accordingly depending on the charge output state of the battery.

Usage:
Connect the charging connector to the battery first, then connect the power plug to the standard 230V power socket. An LED indicator on the charger symbolizes charging. After full charge, the charger turns off and the LED indicator symbolizes the full charge. Your battery is fully charged and can be used.

• The charging port is led as XLR plug. The polarity of the chargers and the connection socket of various eScooter is not standardized!
• Please check for correct polarity and voltage of the charger before connecting! Our polarity of the XLR connector is 1+ / 3 -
• With incorrectly connected polarity or voltage, the charger or the battery can break!
• This charger is only suitable for indoor use!
• Please close the charger after full charge from the battery! The max. Charging time of the battery is calculated using the following formula: Capacity (Ah) of the battery: Charging current (A) of the charger = Charging time in hours (h)
• We assume no liability for improper use!