|
25H-100z laser sprocket with 100 teeth for "thin chain"
|
|---|
Product description:
Laser rear sprocket with 100 teeth. Suitable for the 25H "thin" chain.
This sprocket is made by laser cutting. This makes this sprocket 100% round and therefore has no high or side hit effects. Which naturally has a very positive effect on the driving characteristics.
6,5" Scooter:
Used as a "mountain transmission" 11/100. Suitable for extreme high gradients.
There are 3 hole circles for the screw connection. d=40mm*3, d=48mm*3, d=65mm*4
Sprocket suitable for the following chain:
Symbolic picture. Installed on a 6,5" eScooter 
| Note |
|---|
Depending on the version of the rear swing arm and the engine suspension, a modification may be necessary Of the engine suspension. To enable this conversion, we offer a
"Engine Mount Conversion Flange"
|
Technische Daten
|
|
|---|---|
| number of teeth | 100 Teeth |
| chain splitting | 25H suitable for "thin chain" |
| material | S355J2+N. Laser processed for optimum roundness |
| coating | black coated, corossion protection |
| outer diameter (Da) | aprox 208mm |
| inner diameter (di) | 29mm |
| pitch circle (Lk) | 40mm*3, 48mm*3, 65mm*4 |
| hole spacing (La) | at LK40= 34mm*3 / at LK48= 41,5mm*3 / at LK65= 45,9mm*4 |
| mounting hole(B) | 6,5mm |
| width | aprox 3mm |
| weight | aprox 500g |
| included in delivery: | |||
|---|---|---|---|
| 1x laser sprocket | 100 teeth 25H | ||
| Optionally included (separately for selection) |
|---|
| 1x flange | Engine mount conversion flange |
| 1x attachments | Spacer sleeve, screws, nut and washer |