24V 2A charger for lead - acid battery
-31%
|
24V 2A Lead Charger
|
|---|
Product description:
This charger is suitable for 24V lead batteries! An LED light indicates the charging status. Red = load / green = charged
A rule of thumb for calculating the charging time results from the battery capacity and the charging current. For example, with a completely depleted 12Ah battery and a charger with 2A charging current, this results in approximately:
12Ah / 2A = 6h charging time with 2A charger
Thus, the battery after max. 2h fully charged and the charger can be removed. Of course, the charging time will be shortened depending on the charging state of the battery.
| Attention! |
|---|
- The charging port is led as Japan plug. The polarity of the chargers and the connection socket of various eScooter is not standardized!
- With incorrectly connected polarity or voltage, the charger or the battery can break!
- This charger is only suitable for indoor use!
- Please close the charger after full charge from the battery! The max. Charging time of the battery is calculated using the following formula: Capacity (Ah) of the battery: Charging current (A) of the charger = Charging time in hours (h)
- We assume no liability for improper use!
|
Technical specifications
|
|
|---|---|
| AC input | AC 100-240V 50Hz |
| rated voltage | 24V |
| DC output | 28V |
| max. charging current | 2A |
| overcharge prtection function | Charger stops and lights green when fully charged |
| operating temerature | 0°C bis 35°C |
| dimensions | 120*40*30mm |
| weight | ca. 200g |
| connection input | Japan Plug |
| Included included in delivery: | |||
|---|---|---|---|
| 1x Charger | |||